PolyProtect
Corrosion Protection- Category C5 high
Shore Hardness D > 85 / UV Stable
Canister / Barrel (0,25 kg - 2.000 kg)
2K Cartridge [1:1] - 1.500 ml - ca. 10 m² bei 250 my
2K Cartridge [5:6] - 1.375 ml - ca. 10 m² bei 200 my
PolyProtect - Flexcoat
High Performance Protection - Flexocoat
Shore Hardness D > 50 / UV Stable
Canister / Barrel (0,25 kg - 2.000 kg)
2K Cartridge [1:1] - 1.500 ml - ca. 10 m² bei 250 my
2K Cartridge [5:6] - 1.375 ml - ca. 10 m² bei 200 my
PolyCast
Polymer casting
as an epoxy resin replacement
Shore Hardness D > 80 - 85 / UV Stable
Canister / Barrel (0,25 kg - 2.000 kg)
2K Cartridge [1:1] - 1.500 ml - ca. 10 m² bei 250 my
2K Cartridge [5:6] - 1.375 ml - ca. 10 m² bei 200 my
If required, we also offer the Polymer Systems in transparent / red / white / blue / yellow / black as RAL Colors.
All Products consist of 2 Components and are solvent free. You need a dispenser!
(in cooperation with FLSmidth Hamburg GmbH)
As a ceramic wear protection, WearMax offers excellent permanent protection against hard abrasive and corrosive wear, especially for surfaces subject to loose material. The surface is highly structured. The product is applied as a paste with a spatula between 0.2 cm - 5 cm (larger layer thicknesses are possible) from 10 ° C directly. After 4 hours, the layer is hard and usable.
WearMax HD is a ceramic polymer composite based on WearMax and one of our polymer coatings. The lower layer consists of WearMax and is applied as a paste directly onto the surface. After 1 h, the layer is finish-coated with FPT Polyprotect. The surface is now very smooth and also applicable to moisture-contaminated bulk materials. After 48 hours, the layer is cured and usable.
If required, we also offer the Product in red / white / blue / yellow / black as RAL Colors.
All Products are solent free. You need a dispenser for WearMax-HD - Cover!
Coating for Floors as a Protective and Barrier against Water and Oil.
Coating for absorbent Substrates as a Protective and Barrier against Water and Oil.